Disposable protective face mask

【Model】:Flat Earloop Mask17.5cm*9.5cm
3 ply component： 1 surface layer(23gsm) with sss non-wovwn fabrics. 1 melt-blow interlayer(25gsm); 1 inner layer (23gsm) with sss non-woven fabrics with  specifications.
Application：This standard applies to disposable face masks,not to special-purpose masks such as medical.
USE INSTRUCTIONS：
1.Clean hands before wearing;
2.Close the mask to face, press the metal strip at the bridge of the nose, press the mask along the edge, hang one side earloop first, then hang another side;
3.Then open the folds of the mask and adjust to fit face winkle.

KN95 EFFICIENT PROTECTIVE MASK

【Model】: R-KNFM501
Product Constitute：5ply component,surface is 1 layer nonwoven fabric; 2 layers of 25gsm melt- blown fabric in the middle layer, 1 layer of colse skin sponge, 1 layer nonwoven fabric for inner;
Application：application to PM2.5, droplet, dust, pollen ect protection.
USE INSTRUCTIONS：
1. Open the mask, the hollow side towards the face, nose bar is above
2. Hang the earloop on both ears and adjust left and right to make the ears evenly stressed
3. Adjust the size of the mask to cover the nose and mouth completely
4. Use both hands to adjust nose bar to fit nose
5. Smooth the mask on both sides to fit the face

Disposable protective kids masks

【Model】:Flat Earloop Mask 14.5cm x 9.5cm
3 ply component： 1 surface layer(23gsm) with sss non-wovwn fabrics. 1 melt-blow interlayer(25gsm); 1 inner layer (23gsm) with sss non-woven fabrics with  specifications.
Application：This standard applies to disposable face masks,not to special-purpose masks such as medical.
USE INSTRUCTIONS：
1.Clean hands before wearing;
2.Close the mask to face, press the metal strip at the bridge of the nose, press the mask along the edge, hang one side earloop first, then hang another side;
3.Then open the folds of the mask and adjust to fit face winkle.

Disposable mask machine

General： This machine is mainly used for the automatic forming of flat masks: the whole roll of fabric is driven by rollers after coiling, and the fabric is automatically folded and hemmed; the entire length of the nose bridge is pulled and unrolled, cut to length and then imported into the hemmed fabric. Ultrasonic welding to the seal, then ultrasonic side sealing, cutting and shaping with a cutter; conveying the mask to the two mask earband welding stations through an assembly line, and finally forming the mask by ultrasonic welding; when the mask is made, The pipeline is transported to the flat belt line for collection.    
Incoming specifications:

Item	Gram weight (g/㎡)	Width（mm）	Coil O.D(mm)	Coil I.D(mm)	Weight
Outer Spunbond Nonwoven Fabric	20-40g/㎡	175	Φ600	Φ76.2	Max 15kg
Middle layer meltblown non-woven fabric	20-40g/㎡	175	Φ600	Φ76.2	Max 15kg
Spunbond non-woven fabric	20-40g/㎡	200	Φ600	Φ76.2	Max 15kg
Plastic nose bridge	——	3x8	Φ400	Φ76.2	——
Metal  nose bridge	——	3x8	Φ300	Φ76.2	——
Round earband	——	φ2.5~φ3	——	——	——
Flat earband	——	3	——	——	——

N95 mask machine

Equipment overview: Folding mask continuous all-in-one machine is currently the most versatile folding mask equipment on the market (typical models such as N95 masks). This machine integrates main body welding, built-in nose bridge strip, pad printing, punching, and ear band welding. High degree of automation, one person can operate multiple units, the efficiency can reach 40-45 tablets per minute. Equipment diagram: (This picture is for reference only, the equipment is based on the actual product)
Functions and features:
1. 3M 9001, 9002 and other folding masks can be processed in one process.
2. PLC automatic control, automatic counting.
3. Simple adjust device, easy to change materials.
4. Unique material roll adjustment mechanism, fine adjustment of distance
5. The whole machine uses aluminum alloy, which is beautiful and sturdy. without rusting.
6. Advanced loading and unloading device.
7. High stability and low failure rate.